How to Start a Car with a Screwdriver
Your car breaks down in the middle of nowhere. What do you do? If you have a screwdriver handy, you’re in luck. Follow these steps to get your car started again.
Introduction
In our fast-paced world, the idea of starting a car with a screwdriver may come across as bizarre or even archaic. However, understanding this technique can be a valuable asset in certain situations. Imagine yourself stranded on a deserted road with no access to assistance, and your car refuses to budge. In such instances, knowing how to bypass the ignition system using a screwdriver can be a lifesaver, allowing you to get back on the road and to safety.
How to Start a Car with a Screwdriver
To start a car with a screwdriver, you will need the following:
- A screwdriver
- A pair of pliers
- A jumper cable
1. Locate the starter solenoid. The starter solenoid is a small, cylindrical device that is located on the starter motor. It is usually black or silver in color and has two large terminals on top.
2. Remove the nut from the positive terminal on the starter solenoid. This will expose the positive terminal.
3. Touch the positive terminal on the starter solenoid with the screwdriver. This will complete the circuit and start the starter motor.
4. Hold the screwdriver on the positive terminal until the engine starts. Once the engine starts, you can remove the screwdriver.
5. Reconnect the nut to the positive terminal on the starter solenoid. This will prevent the starter motor from running continuously.
FAQ
- Q: What if I don’t have a screwdriver?
- A: You can use a pair of pliers to complete the circuit. Simply touch the positive terminal on the starter solenoid with the pliers.
- Q: What if I don’t have a jumper cable?
- A: You can use a piece of wire to connect the positive terminal on the starter solenoid to the positive terminal on the battery.
- Q: Is it safe to start a car with a screwdriver?
- A: Yes, it is safe to start a car with a screwdriver. However, it is important to be careful not to touch any other metal surfaces while the screwdriver is touching the positive terminal on the starter solenoid.
Expert Tips
- If you are having trouble starting your car with a screwdriver, try tapping the starter motor with a hammer. This will help to loosen any stuck parts.
- If you are unable to start your car with a screwdriver, you may need to replace the starter solenoid.
- It is a good idea to keep a screwdriver and a jumper cable in your car in case of emergencies.
Conclusion
Knowing how to start a car with a screwdriver is a valuable skill that can come in handy in a variety of situations. If you ever find yourself stranded with a dead car, don’t panic. Just grab a screwdriver and follow the steps outlined above. With a little effort, you’ll be back on the road in no time.
What are your thoughts on this topic? Have you ever had to start a car with a screwdriver? Let us know in the comments below!
