Ceiling lights are a common sight in homes and businesses, and they typically come with a pull cord that allows you to turn the light on and off. Unfortunately, these pull cords can occasionally break, leaving you in the dark. Fortunately, fixing a pull cord is a relatively simple repair. Here’s a step-by-step guide on how to do it:
Image: www.diychatroom.com
Step 1: Gather Your Tools
Before you begin, you’ll need to gather all of the tools you’ll need. These include a pair of pliers, a screwdriver, and a new pull cord. You can find new pull cords at most hardware stores.
Step 2: Shut Off the Power
Before you start working on the light, you’ll need to shut off the power to the circuit that it’s on. You can do this by flipping the breaker or removing the fuse that corresponds to the circuit.
Step 3: Remove the Light Cover
Once the power is off, you can remove the light cover. This is usually held in place by a few screws. Once the screws are removed, you can gently pull the light cover down and off.
Image: dfarq.homeip.net
Step 4: Locate the Pull Cord
With the light cover removed, you’ll be able to locate the pull cord. It’s usually attached to a small metal bracket that’s mounted to the ceiling.
Step 5: Disconnect the Pull Cord
Using the pliers, carefully disconnect the pull cord from the metal bracket. There will be a small knot or crimp that you’ll need to undo.
Step 6: Remove the Old Pull Cord
Once the pull cord is disconnected, you can remove it from the light fixture. It will usually just pull straight out.
Step 7: Install the New Pull Cord
Take the new pull cord and thread it through the hole in the light fixture.
Tie a knot in the end of the pull cord to put a stop bead on it.
Step 8: Connect the Pull Cord
Pull the slack and Now you can connect the pull cord to the metal bracket. Tie a knot or crimp the cord in place.
Step 9: Reinstall the Light Cover
Once the pull cord is connected, you can reinstall the light cover.
Be careful not to overtighten the screws.
Step 10: Turn on the Power
Finally, you can turn the power back on and test the light. If the light turns on and off when you pull the cord, you’ve successfully fixed the pull cord.
How To Fix Pull Cord On Ceiling Light
Conclusion
Fixing a pull cord on a ceiling light is a relatively simple repair that can be completed in just a few minutes. By following the steps in this guide, you can ensure that your ceiling light is back up and running in no time.
