Where Is The Thermal Fuse On A Ge Electric Dryer

Where is the Thermal Fuse on a GE Electric Dryer?

As a homeowner, there are few things more frustrating than a broken appliance. When your dryer goes on the fritz, it can put a major damper on your laundry routine. One common issue that can cause a dryer to stop working is a blown thermal fuse. If you’re experiencing this problem, you may be wondering where the thermal fuse is located on your GE electric dryer. In this article, we’ll show you how to find and replace the thermal fuse on your GE electric dryer so you can get your laundry back on track.

Before you begin, be sure to unplug your dryer from the power outlet. Also, allow the dryer to cool down completely before you start working on it.

Locating the Thermal Fuse

The thermal fuse is typically located near the heating element. On GE electric dryers, the heating element is usually located at the back of the dryer, behind the drum. To access the heating element, you’ll need to remove the back panel of the dryer.

Once you have removed the back panel, you should be able to see the heating element. The thermal fuse is usually located near the top of the heating element. It is a small, white or black plastic component with two wires attached to it.

Replacing the Thermal Fuse

Once you have located the thermal fuse, you can replace it by following these steps:

1. Disconnect the two wires from the thermal fuse.
2. Remove the old thermal fuse.
3. Install the new thermal fuse.
4. Reconnect the two wires to the thermal fuse.
5. Put the back panel back on the dryer and plug it back into the power outlet.

Your dryer should now be working again.

Tips and Expert Advice

Here are some tips and expert advice for replacing the thermal fuse on your GE electric dryer:

• If you’re not comfortable replacing the thermal fuse yourself, you can contact a qualified appliance repair technician.
• Be sure to unplug your dryer from the power outlet before you start working on it.
• Allow the dryer to cool down completely before you start working on it.
• When you’re replacing the thermal fuse, be sure to use a new one that is the same amperage as the old one.
• If you’re still having problems with your dryer after replacing the thermal fuse, there may be another issue that needs to be addressed.

Explanation of Tips and Expert Advice

Replacing the thermal fuse on your GE electric dryer is a relatively simple repair that you can do yourself. However, there are a few things you should keep in mind before you start working on it.

First, be sure to unplug your dryer from the power outlet before you start working on it. This will help to prevent you from getting shocked.

Second, allow the dryer to cool down completely before you start working on it. This will help to prevent you from getting burned.

Third, when you’re replacing the thermal fuse, be sure to use a new one that is the same amperage as the old one. Using a fuse with a different amperage could damage your dryer.

If you’re still having problems with your dryer after replacing the thermal fuse, there may be another issue that needs to be addressed.

FAQ

Here are some frequently asked questions about replacing the thermal fuse on a GE electric dryer:

1. Q: What is a thermal fuse?
2. A: A thermal fuse is a safety device that helps to prevent your dryer from overheating. If the dryer gets too hot, the thermal fuse will blow and shut off the power to the heating element.
3. Q: Where is the thermal fuse located on a GE electric dryer?
4. A: The thermal fuse is usually located near the heating element, at the back of the dryer.
5. Q: How do I replace the thermal fuse on a GE electric dryer?
6. A: You can replace the thermal fuse on a GE electric dryer by following the steps outlined in this article.
7. Q: What should I do if I’m still having problems with my dryer after replacing the thermal fuse?
8. A: If you’re still having problems with your dryer after replacing the thermal fuse, there may be another issue that needs to be addressed. You can contact a qualified appliance repair technician to help you diagnose and fix the problem.

Conclusion

If your GE electric dryer is not working, one possible problem could be a blown thermal fuse. Replacing the thermal fuse is a relatively simple repair that you can do yourself. By following the steps outlined in this article, you can get your dryer back up and running in no time.

Are you interested in more information on how to fix a GE electric dryer?